this machine applied to produce sand-beach desk
| Clamping system | Diagonal two tie bar center clamping bi-directional synchronous high precision linear guiding clamping clamping device |
| Extrusion system | + Hard gear surface reducer+Japan inverter |
| Die system | single cylinder center material-in accmulator head |
| Hydraulic system | + Japan hydraulic valve,seal and proportional control |
| Control system | PLC+()+PLC Japan PLC+Human-machine interface+PLCautomatic temperature control model |
| Specifications | FA-100 | FA-120 | FA-140 |
| Material | | PE,PP,ABS... | PE,PP,ABS... | PE,PP,ABS... |
| Max container capacity | L | 120 | 230 | 260 |
| () Output(dry Cycle) | pc\hr | 260 | 180 | 160 |
| (XX) Overall Dimension(LxWxH) | M | 6.2x2.8x4.5 | 6.8x4.2x5.8 | 7.7x4.8x6.8 |
| Total weight | ton | 14 | 35 | 41 |
| Clamping Unit | FA-100 | FA-120 | FA-140 |
| Clamping force | kn | 360 | 700-800 | 890-1000 |
| Platen opening stroke | mm | 350-1200 | 880-1700 | 920-1860 |
| Platen size | mm | 1020x1060 | 1200x1300 | 1300x1400 |
| (x) Max mould size(W x H) | mm | 780x1260 | 950x1600 | 1000x1700 |
| Mould thickness | mm | 360-600 | 900-960 | 1000x1100 |
| Power | FA-100 | FA-120 | FA-140 |
| Max drive | kw | 90 | 200 | 240 |
| Toal power | kw | 108 | 255 | 280 |
| Fan power for screw | kw | 0.6x4 | 0.6x5 | 0.8x5 |
| Air pressure | Mpa | 0.8 | 1 | 1 |
| Air consumption | m3/min | 0.8 | 3 | 4 |
| Average energy consumption | kw | 51 | 135 | 155 |
| Extruder unit | FA-100 | FA-120 | FA-140 |
| Screw diameter | mm | 100 | 120 | 140 |
| Screw L/D ratio | L/D | 24 | 28 | 28 |
| Plasticising capacity | Kg/hr | 140 | 320 | 390 |
| Number of heating zone | zone | 5 | 6 | 6 |
| Extruder heating power | KW | 25.1 | 38 | 42 |
| Extruder driving power | kw | 37 | 120 | 160 |
| Accumulator head | FA-100 | FA-120 | FA-140 |
| Number of heating zone | zone | 5 | 6 | 6 |
| Power of die heating | kw | 26 | 38 | 45 |
| Max die-pin diameter | mm | 420 | 480 | 520 |
| Accumulator capacity | L | 12 | 22 | 26 |
fa-100/fa-120/fa-140 series automatic blow moulding machine
